No products in the cart.
Polaris GENERAL 1000 Expedition Rack
Polaris GENERAL 1000 Expedition Rack
This does not fit your 2022 Can-Am Maverick Sport 1000R XRC
$99.99 – $1,449.99
-
2 Eta
- Ships in 2 days!
-
- ** Remove spare tire from tailgate before tilting bed! Serious injury or damage could occur!
- Does not interfere with dump bed operation
- Tailgate can be padlocked to secure items
- (3) “It Fits”™ mounting locations for RBO accessories.
- Secure cargo from every direction with multiple tie-down points
- No modification needed! Use basic hand tools to install
- Maximum combined capacity of cargo rack 160 lbs. (Limited by vehicle capacity)
- Load capacity of top rack is 60 lbs. (Limited by vehicle capacity)
- Load capacity of side rack is 30 lbs. per side (Do not mount spare tires on side racks)
- MAX Tailgate Load Capacity is 40 lbs. *Spare tire should not exceed 40 lbs. or 29″ in diameter.*
- Made from 1.5” diameter steel tubing
- Powder coated finish available in textured black
- All mounting hardware included
- Made in USA
Click Icons for More Information:
Description
Product Videos
Dimensions
Product Manual
Replacement Parts
A Fully Functional Polaris GENERAL 1000 Cargo Rack
We designed this RBO Expedition Rack™ to add more versatility to your Polaris GENERAL 1000 by providing a tailgate to keep your gear secure. You can padlock the tailgate to keep your possessions safe and secure. We also added a gas strut to hold the tailgate open and out of the way when you’re grabbing your gear or using your dump bed. The factory dump bed remains fully functional even with the rack installed – just remove your spare tire from the tailgate before dumping.
A UTV Upgrade Designed by Off-roading Experts
We’re a team of people who use these machines ourselves, so we understand the importance of tying down gear. We included numerous tie down locations throughout the bottom and sides of the upper tray. We also included more tie down locations along the bed railing for the ability to secure any cargo in the bed of the machine.
We make our Expedition Racks™ from 1.5” diameter steel tubing and give them a rugged, powder coated finish. This rack is a sleek and durable addition to your Polaris GENERAL guaranteed to enhance your off-roading experience.
Simple Mounting System for Easy and Non-destructive Installation
This rack allows you to effortlessly install RBO accessories with the “It Fits”™ mounting capability. You can carry fuel cans, water jugs, spare tire mounts, and other accessories all while looking cool out on the trail, around the farm, jobsite, or wherever your UTV takes you.
The Polaris GENERAL 1000 Expedition Rack™ by RBO includes all the installation hardware needed to quickly and easily install the rack without any drilling or modifications. Your satisfaction is important to us so we offer a 30 day money back guarantee*. All RBO products are proudly made in Idaho, USA. Experience today why so many people are installing a RBO cargo rack on their side x side UTV.
With 0% financing and monthly payments through Affirm, it’s easier than ever to complete the build of your machine! Be sure to check out the “It Fits”™ Adjustable Spare Tire Mount, as well as the “It Fits”™ RotoPax Mount, and the UTV Chainsaw Mounts to maximize your machine!
5 reviews for Polaris GENERAL 1000 Expedition Rack
Add a review
You must be logged in to post a review.
Compatible Vehicles
| Year | Make | Model |
2021 - Current | Polaris | GENERAL® XP 1000 |
2021 - Current | Polaris | GENERAL® XP 4 1000 |
2021 - Current | Polaris | GENERAL® 4 1000 Deluxe |
2021 - Current | Polaris | GENERAL® 4 1000 Premium |
2021 - Current | Polaris | GENERAL® 1000 Deluxe |
2020 - Current | Polaris | GENERAL® 1000 Sport |
2020 - Current | Polaris | GENERAL® 1000 |
2016 - Current | Polaris | GENERAL® 1000 EPS |
2016 - 2020 | Polaris | GENERAL® 1000 EPS Deluxe |
2018 - Current | Polaris | GENERAL® 1000 EPS Ride Command Edition |
2018 - Current | Polaris | GENERAL® 1000 EPS Hunter Edition |
2018 - Current | Polaris | GENERAL® 1000 EPS Premium |
2017 - 2020 | Polaris | GENERAL® 4 1000 EPS |
2018 - Current | Polaris | GENERAL® 1000 Limited Edition |
2018 - Current | Polaris | GENERAL® 1000 Premium |
2018 - Current | Polaris | GENERAL® 4 1000 EPS Ride Command Edition |
2020 - Current | Polaris | GENERAL® XP 1000 Deluxe |
2020 - Current | Polaris | GENERAL® XP 4 1000 Deluxe |
Related products
Sale!
Original price was: $1,844.68.$1,799.99Current price is: $1,799.99.
Best
Seller
Seller
This Fits Your 2022 Maverick Sport 1000R
Adrian Alan –
Awesome piece of equipment. We added the Expedition Rack to our ’21 Polaris General 4 1000 DLX and have logged over 2,000 miles with it so far, including a 7-day 650 mile overlanding trip in the Black Hills National Forest, mainly on trails and forest roads. We were able to fit almost as much gear in our SxS with the rack on as we could in my Toyota Tundra’s truck bed – enough for two adults and two kids to make the trip and not have to stop for supplies constantly. We found out later we went over the recommended weight on the top shelf on our trip (by quite a bit – oops!), but there were no problems at all.
We carry our 27″ spare tire on the rear gate and can open and close the gate with the tire on no problem. We also carry two, 3-gallon Rotopax fuel tanks on the outside of the rack as well as a small shovel on a took holder inside the rear gate. I had planned on removing the rear gate for most of our riding but I have just left it on. We carry the fuel and spare tire everywhere now – it’s easy.
Installation was simple. The finish is tough as nails. It looks great on our machine. The chicks dig it (ok, I mean my wife).
Two minor things we’ve experienced: I think because the General’s bed is all plastic, with the rack on, the sides of our bed around the tailgate have spread just a little (maybe 1/2″ on each side) so the Polaris tailgate doesn’t always latch securely. I added a couple 1/4″ spacers/washers to the Polaris tailgate latch points on our machine and that took care of it – easy fix. If you’re really bombing over rough terrain, I would also recommend putting a padlock or safety/hitch pin through the latch just to doubly make sure the gate doesn’t pop open. Ours did once while riding – we rode over rough terrain, fully loaded for probably five miles with the gate swinging open and closed with our heavy 27″ spare tire on the back before we noticed. I would have thought that would have bent the hinges to hell or damaged the rack – but it was perfectly fine! Absolutely incredible!
Seriously, this rack has transformed our SxS from a day-riding toy into a legitimate overlanding machine. For camping, overlanding or anything else, this is a cool piece of equipment. I’d like to pick up another one sometime for my Ranger we use around our property. I also have my fingers crossed RBO will come out with a replacement roof or roof rack for the General next!!!
otisdriftwood –
Ordered for my 2018 General. Installation was very easy, took about 2 hours. Now, in addition to increased hauling capacity, I can take the pups with me when I go out and about. Quality piece of equipment.
Jacob Preston –
This rack is awesome worth every penny! You get what you pay for… installation was a pretty easy but need to adjust my rear gate to compensate for my 30” spare tire and I’m having a hard time doing that. Need to take more time to look into it but other then that this elevates the hauling capacity of ur general and makes ur general way more versatile! RBO products are awesome!
Wsmith –
Well made piece of gear. Very solid. Easy to follow instructional video made install a breeze. Had a little trouble getting the latch to line up but a nylon washer made a perfect spacer to adjust it so it shuts easily. Perfect for holding your gear for a weekend camping trip or more.
Gary LaFleur –
The Razorback Offroad RBO Polaris RZR 1000 Gen. 2 Expedition Rack is very well made and not to hard to put on . Yes it cost a lot but Well worth the price after seeing the construction and the welds are really done well. I have to say Dee is the person i talked to very helpful and He got my order out fast. The packaging was superior to none. I do have to say if you are Looking for a Rear Rack for your SXS this one is what you are looking for , Now i have to Buy the Jerry can bracket to finish off the look.